$19.00 - $21.00
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.
SRAM's X0 shifters are an absolute must for riders who desire and deserve the best. The adjustable clamp mount and trigger lever allow you to custom tune the shifters for one-finger, ergonomic gear changes that are near telepathic. Crafted with a compact aluminum body and super-smooth ball-bearing pivots, the X0s are super light and race-ready, yet built tough to handle all your off-road endeavors.
It's all in your hands. From any position on the handlebars the ergonomics of Campagnolo's Ergopower controls enables you to engage the rear derailleur and front derailleur with extreme speed and precision. The Record shifters offer the maximum in performance while safety and comfort are not to be neglected: every detail is designed to provide sublime comfort even after long hours on the bike. - Composite body, carbon-inlay shift lever, carbon fiber brake lever and ball bearing shift mechanism - Ergonomic hood design follows the asymmetry of the hand, increasing the contact area of the palm and offering multiple riding positions - Two clicks downshift into the small chain ring, while a third shift is used for trim - Ergopower Ultra-Shift rear controls can shift the chain simultaneously three sprockets up or five down - Hypoallergenic silicone with multiple densities is used as hood material offering greater softness in the palm area and greater rigidity in the gripping area - No-Bulge technology smooths the cable passage as the housing exits the controls - Campagnolo 2015+ 11-speed specific, not compatible with previous versions of Campagnolo 9/10/11 speed, Shimano or SRAM derailleurs - Speed: 2 x 11-speed - Front/Rear: set - Adjustable Reach: Yes - Ultra-Shift cables and housing included - Weight: 348g
$9.00 - $14.00
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.
Step up to the next generation in shifting with SRAM's wireless RED eTAP electric aero drivetrain kit. The aero kit includes Blip shifters, derailleurs, battery charger and USB stick. Brake levers not included. Each kit contains: - 4x SRAM eTAP 650mm Blip remote shifter buttons - SRAM eTAP Blip Box - SRAM RED eTAP wireless front and rear derailleurs - SRAM eTAP batteries - Battery charger - USB stick - Quick-start guide
Shimano's Dura-Ace Bar-End Shifters are great for tourists, commuters, cyclocrossers, triathletes and time trialists. They provide precise and reliable shifting on double- and triple-chainring drivetrains.
SRAM's X3 shifters feature two-lever trigger shifting performance at a great price. With Exact Actuation 1:1 cable pull ratios, these shifters deliver quick, accurate shifts.
Designed for the most discerning, performance obsessed riders, SRAM's GX 2x11 Front Grip Shifter features weight-saving construction and delivers outstanding speed and precision. SRAM's X-Actuation gives you precise and dependable front 2-speed performance. This left-side front shifter is compatible with SRAM's GX 2x11-speed front derailleur. • Full metal, 2-speed indexing keeps shifting crisp and precise with Grip Shift • Three rows of ball bearings provide zero friction or play—reducing the force needed to shift and promoting long-term performance under all weather conditions with Grip Shift • Once the Grip Shift shifter and grip interlock securely, forged aluminum clamps on either end reinforce the assembly by locking tightly to handlebar • Weight: 144 grams
• Economical replacement twist shifters • Left: triple-chainring; Right: 7-speed • Cables and housing included
Shimano's XTR Rapidfire Plus Front Shifter offers unparalleled shifting quality and unbelievable speed. Two-Way Release shift levers keep shifts fast and intuitive, and multi-release capability means you have the power to shift across multiple gears in an instant. Since these shifters are optimized for use with Shimano's Dyna-Sys Technology, the lever feel is crisp and authoritative. Shimano's I-spec mounting system for a clean and simple handlebar setup. This front shifter can be converted for use with double or triple-chainring cranks, so you can experience XTR-quality shifting no matter what drivetrain you prefer.
Shimano's XTR Rapidfire Plus Rear Shifter offers unparalleled shifting quality and unbelievable speed. Two-Way Release shift levers keep shifts fast and intuitive, and multi-release capability means you have the power to shift across multiple gears in an instant. Since these shifters are optimized for use with Shimano's Dyna-Sys Technology, the lever feel is crisp and authoritative, and the shifter uses Shimano's I-spec mounting system for a clean and simple handlebar setup.
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a SRAM or Shimano front derailleur. These shifters are indexed to shift three gears, and feature micro-adjustments for perfect front derailleur alignment.
It has the proven SRAM shifter technology and authoritative lever feel, but the EX1 shifter has been engineered to deliver one perfectly accurate shift at a time, alleviating double shifting and over shifting. Single precise gear changes increase battery life and help to decrease component wear. - X-ACTUATION for precise and dependable performance - Single shifts reduce over shifting and increase battery performance - Weight: 122 grams - Speeds: 1 x 8-speeds - Recommended Group: EX1
Shimano's Alfine Di2 Flat-Bar Shifters are a stylish and sophisticated way to enjoy the ultimate urban riding experience. - Easy Access to Shifting - Compatible Internal Geared Hub: SG-S705, SG-S505 - Compatible Brake Lever: BL-S700
Shimano Ultegra SL-BS64 Double/Triple 8-Speed Bar end Shifters - Friction-compatible right lever - This shifter is not compatible with 8-speed Dura Ace; packaging calls out Dura Ace but the shifter itself is Ultegra - All bar-end road shifters produced after Nov 2008 have an I.D. spec fit range of 19-22mm - End Type: Shimano/Sram - Weight: 83 grams
$62.99 - $134.99
Shimano's Tiagra Raidfire Plus Shift Lever (3x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with cascaded technology from the Dura Ace line. Model Number: SL-4703 Series: Tiagra Shift Lever Type: Rapidfire Plus Front Shifting: 3-speeds Shift Cable Casing:Tiagra
$33.99 - $37.99
- Ergonomically Designed For Reduced Shifting Effort - Consistently Stable Shifting - Easy To Install, Compact Design And Slim Brake Lever For Lightweight - Simple, Adaptable Cockpit - 20% Lighter Rear Shifts - 11-speed compatible
- Drivetrain Speeds: 3x9 - Front Der/Shifter Compatibility: Shimano Mountain - Shifter Style: Trigger - Includes shift cables and housing
The Firebolt Switch Unit control with intuitive operation is ergonomically designed for a MTB. It’s the ultimate in comfort and reliability as you switch between modes while blasting through the trails. - The e-MTB Switch Unit (SW-E8000-L) is ergonomically designed for the specific demands of MTB riding such as riding through tight singletrack and bumpy terrain - Accurate, smooth shifting between power-assist modes regardless of weather or terrain conditions - Switch between Boost, Trail, Eco and Walk settings in a flash during the ride. Shifters incorporate the same design and shifting feel as XT Di2 TECHNICAL SPECIFICATIONS - Four support settings to choose from: Boost, Trail, Eco, Walk - Boost: Complete support for a max boost and expert climbing - choose between high, med, or low level of assist - Trail: Intuitively smooth gradated support through even the most demanding singletracks. Automatically adjusts its level of support based on pedal pressure. Choose between high, med, or low level of assist - Eco: Solid support for those long expeditions - Walk: Assists you when you need to get off the bike and walk it—simple to activate
SRAM's X0 shifters aren't just a pretty face, they actually have an Olympic Gold medal to their credit. But you'd expect that from some of the lightest and quickest shifters out there and some of the easiest to use, too. They actually allow you to shift across up to 6 gears at once, and with their simple twisting action you never miss shifts. Ride light, shift fast and go for the gold with X0!
Shimano's SLX RapidFire Plus Shift Levers make it easy to pick the perfect gear for every terrain. They feature dual release so you can push or pull the upper trigger, so shifting is easy and intuitive. A removable Optical Gear display allows heads-up monitoring, and finding the perfect bar position is a snap with the ergonomic levers. They are 10-speed compatible and the front switches from 2x to 3x easily, so no matter how many rings you're running up front, SLX has you covered.
It's easy to replace a worn or damaged shifter for your Shimano Alfine SL-S7000-8 internally geared hub when you have the right part. This is it! - Only compatible with Alfine S7000-8 hubs - Includes shifter, 2100mm shift cable with housing and cable fixing bolt unit for CJ-S700-8 cassette joint - 22.2mm clamp diameter, Rapidfire shift pod - Shimano 2-way release feature - Optical gear display - Shimano "top normal" shifting
Shimano's SL-RS700 Flat Bar Road Shifter Set are perfect for anything from a jaunt around town or a post-work fitness ride. - Double or Triple: Double - Drivetrain Speeds: 11 - Front Der/Shifter Compatibility: Shimano Road - Rear Der/Shifter Compatibility: Shimano Road - Shifter Style: Thumb - Weight: 280 grams
Perfected by some of the fastest downhillers on the planet, Shimano's Saint Rapidfire shifter is heavenly when it comes to durability and crisp shifting. The Saint boasts optional inboard or outboard mounting so you can run it on either side of your brake lever. The triggers shift in both directions, depending on your preference and instantly release so your gear changes are lightning quick. You're rolling down the trail and the a big gap ahead? Just pop, pop, pop and hit the lip with the perfect speed. The levers are a little longer for better leverage, too. And when you do take that occasional digger, the shifter pod is hidden away under the brake lever for extra security.
Shimano wrote the book on mountain bike shifting, and their Deore Rapidfire Shifter Set carries on that tradition. Light, smooth action is paired with decisive shifts for fast and easy on-trail gear changes. The left shifter incorporates a mode converter so these components can be used with either 2x or 3x drivetrains. Shimano's I-Spec mounting system streamlines your handlebar setup with the shifters and brake (sold separately) attached to a single clamp.
• Multiple simultaneous display fields • Battery level • Gear position • Shift mode (Synchronized or Manual) • FOX iCD position (Climb or Descend) • Shimano Synchronized Shift mode switch • Change between S1, S2, and Manual shift maps • Audible Shimano Synchronized Shift notification tone • Precision derailleur adjustment • Easy access adjustment mode • Numerical adjustment indicator • Junction A function • Battery charging port • Three E-tube wiring ports
$1.00 - $12.00
- Hoods with (FD) are Flight-Deck compatible
$6.00 - $9.90
- Front Cover Plate kit (left) - Cable hatch logo plate (left)
SRAM's X4 shifters feature Exact Actuation 1:1 cable pull ratios for precise, dependable 3-speed front shifting. They deliver SRAM's proven ergonomics and excellent performance at a great price.
Get sharp, dependable X-Actuation shifting with SRAM's GX 2x11 Rear Trigger Shifter. This right-side rear shifter is compatible with SRAM’s 2x11-speed components, offering precise, swift shifting across their wide-range 11-speed cassette. • Dedicated 11-speed rear trigger shifter • Multi-position mounting • Discreet clamp • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams
Page 1 of 5 Next page