Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Wolf Tooth Components Set of 4 Chainring Bolts+Nuts For 1x
$19.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
SRAM Carbon Crank Arm Boot
$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.
Origin8 Thruster 2x Chainring Bolt Set
$7.99 - $9.99
- Chainring bolt sets are available in sets of four or five - Bolts have 5mm hex heads - Material: Steel - Type: 2x
TruVativ M15/M22 GXP Crank Arm Self-Extracting Bolts
$10.80
TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included
Race Face X-Type Spindle Spacer Kit XC/AM Cranks
$4.99
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
MRP XCg V2
$69.95
Utilizing MRP's patented integrated skid (US Patents RE 42,436 / 8,235,849 Patents Pending), the XCg tucks neatly behind your crankset and protects those costly chainrings from damage. The replaceable nylon skid glides over rocks and obstacles. - Great accessory to protect costly chainrings - Integrated skid protects chainrings and glides over rocks and obstacles - 88g (XCg V2 32t, ISCG-05 model)
Hope Spider for Hope Cranksets
$63.60
Choose the Hope Crankset Spider you need for the chainring combination you want. - Interchangeable and replaceable on Hope Cranksets - Single chainring model for use with a single 104BCD chainring with or without bashguard - Double chainring model for use with a 64/104BCD double chainring setup - Allows installation of bashguard on outer position
SR Suntour XCT Left Crank Arm
$15.00 - $19.99
SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.
Shimano 105 5800 Left Hand Crank Arm
$72.00
- Crank Construction : HOLLOWTECH II - Optimum power transfer
Easton EC90 SL Crank Spindle
$89.99
Replacement crank spindle for Easton EC90 SL cranks
All-City Cross Wizard Chainring Guard
$45.00
All-City's lightweight Cross Wizard chainring guard is the perfect addition to a single ring or singlespeed setup. While not a full-on mountain bike ‘bash guard’ these are just the thing to keep your chain on and your teeth intact. Named after the one and only Cross Wizard! (You have to say it like that, with the exclamation at the end.) These are available in 110mm and 130mm bolt circle diameters for all your ‘crossy needs. - Material: CNC machined 6061-T6 aluminum
Wolf Tooth Components CAMO Direct Mount Spider for SRAM
$27.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
Wolf Tooth Components CAMO Direct Mount Spider for Specialized S-Works
$27.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Specialized S-Works cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. One chainline option is available for S-Works cranks. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M1 (minus 1mm - dished toward the frame): For 49mm chainline, designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes.
Wheels Manufacturing Inc. BSA Bottom Bracket Spacer
$4.25
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
e*thirteen by The Hive Chain Guide Lower Slider Kit
$12.95
- Lower slider replacement parts for E-13 chainguides
Blackspire Single Ring Chain Guide Roller Kit
$12.34
- Includes replacement lower roller, 608 2Rs cartridge bearings, axle, bolts, and washers to fit blackspire single-ring roller chain guides
Race Face Cinch Direct Mount Spider
$59.99
Race Face direct-mount chainring spider for Cinch ranksets.
MRP G3 Steel
$89.95
The G3 features MRP's patented integrated skid (US Patents RE 42,436 / 8,235,849 Patents Pending), which protects critical drivetrain components like the crank and chainring from damage and glides over rocks and obstacles. The skid and lower guide are combined into one solid structure. The skid and lower guide also feature our new attachment system, the Swingset. The Swingset system features a pivot at the forward skid mount that allows the skid to swing down for super easy crank and chainring installation. - Integrated skid protects chainrings and glides over rocks and obstacles - Includes standard pulley and new G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Nylon upper guide - Quietring wrap on the upper guide's tail mitigates chain-slap - 34-38t sizing - Stamped steel backplate - All install and adjustment operations possible with just a single 4mm HEX wrench. - 236g (ISCG-05)
Sunlite Omni-Fit Chainguard
$32.00
• Adjustable aluminum chain guard • Fits front chainrings from 38T to 48T • Multiple clamp options fit seat tubes from 25.4 to 34.9mm • Black anodized finish
e*thirteen by The Hive ISCG-05 to BB Adapter Plate
$17.95
- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets
Shimano Crank Bolts
$17.00
- Octalink bolts include steel washers, JIS includes black plastic caps - HT2 mount bolts (low torque plastic, except XTR-M970 aluminum) are for mounting non-drive arm - Hollow bolts (SH-21504) not recommended for non-treated spindles
WeThePeople Legacy Crank Bolt
$9.99
Replacement crank bolt for WeThePeople's Legacy crank.
Race Face Cinch Drive Side Crank Bolt
$7.99
Replacement crank bolt for RaceFace Cinch cranks.
Shimano SLX M7000-B1 Boost Crank Arm Set
$100.99
- Pedal Spindle: 9/16" - BB Included: No - Chainring BCD: 96 Shimano Asymmetric - Intended Use: Mountain - Spindle Interface Type: Shimano Hollowtech II - Chainline/Hub Compatibility: 141/148 Boost Hubs
Shimano SLX M7000 Left Crank Arm
$72.00
- Series: SLX - Crank Construction: HOLLOWTECH II Technology
Quarq DZero Power Meter Spider for Specialized
$779.00
DZero is Quarq's next-generation power meter platform for those who live to be challenged, pushed, and tested in the toughest scenarios imaginable. Now Quarq has introduced a DZero spider designed to replace the factory spider on Specialized's S-Works carbon crankset. Quarq DZero for Specialized embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. You also get AxCad accelerometer cadence, the easy-to-replace CR2032 battery, an IPX7 waterproof rating and a 2-year warranty. Features & Benefits: - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Traditional 5-arm spider compatible with Specialized S-Works Carbon Road Crank Arms from 2013-Current. - Available in 130 BCD and 110 BCD. - Replaces the standard spider. - A Specialized lockring tool is required for installation.
Wheels Manufacturing Inc. PF30 Adapter for 22/24mm Spindle Cranks
$40.00
Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Race Face Crank Arm Outer Tab Spacers (Set of 4)
$11.99
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
Race Face Turbine/Next XC/SixC and 2008+ Deus Crank Bolt/Puller
$8.99
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
FSA BB-386EVO/Press-Fit BB30 Bearing Assembly
$40.99 - $200.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options